电脑通过Putty远程连接树莓派

确保你的电脑和你的树莓派连接同一个热点

1.让你的树莓派与你的电脑连接你的手机热点

输入指令看到wlan0的RX与TX不是0就代表连接热点成功了 pi@raspbian:~$ sudo ifconfig wlan0 wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.243.125 netmask 255.255.255.0 broadcast 192.168.243.255 inet6 2409:8914:244:b7f:1f05:f093:abf3:30ce prefixlen 64 scopeid 0x0<global> inet6 fe80::ceda:dbd1:2893:9ff9 prefixlen 64 scopeid 0x20<link> ether dc:a6:32:29:13:8d txqueuelen 1000 (Ethernet) RX packets 866 bytes 106471 (103.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 478 bytes 71486 (69.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 判断是否能访问Internet，可以Ping www.baidu.com pi@raspbian:~$ ping www.baidu.com PING www.a.shifen.com (39.156.66.18) 56(84) bytes of data. 64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=1 ttl=50 time=44.7 ms 64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=2 ttl=50 time=58.7 ms 64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=3 ttl=50 time=59.0 ms 64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=4 ttl=50 time=41.8 ms 64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=5 ttl=50 time=42.4 ms

2.使用Putty连接树莓派

1>下载一个Putty

2> 查看树莓派的ip地址，在树莓派终端输入 sudo ifconfig，里面的192.168.243.125就是我们要的ip地址

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.243.125 netmask 255.255.255.0 broadcast 192.168.243.255 inet6 2409:8914:244:b7f:1f05:f093:abf3:30ce prefixlen 64 scopeid 0x0<g

3> 输入地址，然后连接

这里填写你的树莓派用户名，一般是 pi

这里填写你的树莓派密码，一般是raspberry

参考资料