STM32同时使用多个定时器

  代码如下：

void TIM2_IRQHandler ( void ) {
          
   
    if ( TIM_GetITStatus ( TIM2, TIM_IT_Update ) != RESET ) {
          
   
        /* user code */
    }

    TIM_ClearITPendingBit ( TIM2, TIM_IT_Update );
}

void TIM2_Int_Init ( u16 arr, u16 psc ) {
          
   
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    NVIC_InitTypeDef NVIC_InitStructure;
    TIM_TimeBaseStructure.TIM_Period = arr;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit ( TIM2, &TIM_TimeBaseStructure );
    TIM_ITConfig ( TIM2, TIM_IT_Update | TIM_IT_Trigger, ENABLE );
    TIM_Cmd ( TIM2, ENABLE );
    NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
    NVIC_Init ( &NVIC_InitStructure );
}

void TIM3_IRQHandler ( void ) {
          
   
    if ( TIM_GetITStatus ( TIM3, TIM_IT_Update ) != RESET ) {
          
   
        /* user code */
    }

    TIM_ClearITPendingBit ( TIM3, TIM_IT_Update );
}

void Send_Timer_Init ( u16 arr, u16 psc ) {
          
   
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    NVIC_InitTypeDef NVIC_InitStructure;
    RCC_APB1PeriphClockCmd ( RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3, ENABLE );
    TIM_TimeBaseStructure.TIM_Period = arr;
    TIM_TimeBaseStructure.TIM_Prescaler = psc;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit ( TIM3, &TIM_TimeBaseStructure );
    TIM_ITConfig ( TIM3, TIM_IT_Update | TIM_IT_Trigger, ENABLE );
    TIM_Cmd ( TIM3, ENABLE );
    NVIC_PriorityGroupConfig ( NVIC_PriorityGroup_4 );
    NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
    NVIC_Init ( &NVIC_InitStructure );
}

注意，在使用时，首先调用Send_Timer_Init，然后调用TIM2_Int_Init。